Glass ink is an ink that can adhere to glass

Release time:

2023-03-21 00:00

Source:

Source

Glass ink is an ink that can adhere to glass

Glass ink (glass printing ink) can be printed on glass and can be firmly attached to the ink.

1, glass ink can be used to manufacture craft glass or painted glass and other crafts, because the glass paint color ability, waterproof function is good, not easy to change color and other functions, so in the manufacture of these crafts will not occur when cracking blistering phenomenon, can be very good protection of glass, but also increased the ornamental glass, in the living room dining room to play a decorative role.

2, glass ink film plump, bright color and pure, smooth, high hardness, strong adhesion, yellowing resistance, water resistance, acid resistance, alkali resistance, aging resistance, wear resistance, fast boring, good durability, convenient construction, curing will not occur bubbles and other advantages.


3, from the temperature up classification, can be divided into low temperature glass ink, high temperature glass ink and self-drying glass ink. And from the nature of the classification, there are two kinds of oily glass ink and water-based glass ink. In addition, according to different construction methods, it can be divided into manual glass, hand-painted glass ink, spray glass ink and shower coated glass ink.

4, water-based glass ink to water as the main solvent, save a lot of resources; eliminate the transportation, storage and construction of the fire hazard; useful to reduce the VOC content, reduce the pollution of the atmospheric environment. It does not contain free TDI, benzene, toluene, xylene and other harmful substances, and will not harm human health. It is a brand-new environmentally friendly and low-toxic product, which is conducive to the health of builders and is also responsible for customers.

5. In terms of price, water-based glass ink is generally a little more expensive than oil-based glass ink, but the diluent used by the two is different. Tianshui is about one kilogram in 8 yuan, while the cost of water is very low, so the cost is almost the same in summary.

Previous Page

Water soluble paint

Next Page

On the use of glass ink steps and key points

More news

Overview of Water Soluble Coatings and Its Classification

1, with a clean diluent or water will be transferred to the appropriate coating viscosity, the coating -4 viscometer measurement, the appropriate viscosity is generally 18 to 30 seconds. If there is no viscometer at the moment, visual inspection method can be used: stir the coating evenly with a rod (iron rod or wooden rod) and then stop at a height of 20cm for observation. if the paint solution keeps running within a short period of time (a few seconds), it is too thick; If the line is broken from the upper edge of the barrel, it is too thin. When it is stopped at a height of 20cm, the paint solution will form a straight line and drop will instantly cut off, this viscosity is more appropriate.

Glass protection ink

The bottleneck problem of touch glass mentioned by manufacturers is, first of all, environmental protection safety regulations. In recent years, local governments in mainland China have attached great importance to industrial environmental protection issues. Process emissions with serious emissions and heavy pollution are subject to strict supervision, and penalties can be severe enough to order the shutdown of factories. In the past, manufacturers used UV-hardened peelable glue to protect the surface integrity of the glass during the cutting process, but they needed to be soaked and stripped with NaOH strong alkali solution afterwards. Now there is no factory for sewage treatment and discharge. Therefore, Crown Chemical provides manufacturers with a new U2 UV curable surface protection ink, which has good water resistance and scratch resistance. It can be coated with screen printing and then cured with UV light to form a good protective film, which can avoid damaging the precise glass surface during cutting. After the cutting process is completed, soak and strip with Na2CO3 sodium carbonate weak alkali solution. This UV-curable glass cutting protection ink has attracted much attention. In addition to solving the problem of environmental protection in the process, it is also very suitable for stacked glass cutting developed by mainland manufacturers in large-scale production.

Instructions for use of screen glass metal ink

Instructions for the use of glass ink In the four printing methods, silk screen printing is widely used in the printing industry because it is suitable for large color blocks of flat printing and printing effects. In the printing of glass products and glass crafts, screen printing glass ink is the most widely used one. Glass ink adheres to the concept of innovative technology and innovative products, and is recognized by industry insiders and customers in the market. Let's take a look at the instructions for the use of glass ink.

Water soluble paint

Overview of Water Soluble Coatings and Its Classification Core Tip: Water-soluble coating is a kind of coating made of water-soluble synthetic resin as the main film-forming substance, water as diluent, adding appropriate amount of pigment, filler and auxiliary materials, etc. Water-soluble coatings have formed a multi-variety, multi-functional, multi-purpose, large and complete system. Water-soluble coating is a water-soluble synthetic resin as the main film-forming material, water as diluent, adding the right amount of pigments, fillers and auxiliary materials, etc., after grinding a coating. Water-soluble coatings have formed a multi-variety, multi-functional, multi-purpose, large and complete system.

What is the effect of pigment dispersion on coatings

In the use of coatings, people often encounter problems such as flocculation, insufficient color or transparency, poor rheology or stability, which are closely related to the insufficient dispersion of pigments. Purely theoretically, "well dispersed" means that each pigment particle in the system is completely unflocculated, I .e., each pigment particle is wrapped by a thin layer of binder or solvent. In practice, however, this is difficult to achieve. So, what is the effect of pigment dispersion on the performance of the coating?

A pigment is a substance that causes an object to be colored.

A pigment is a substance that colors an object. Pigments are soluble and insoluble, and there are differences between inorganic and organic. Inorganic pigments are generally mineral substances, humans have long known the use of inorganic pigments, the use of colored soil and ore, in the rock wall painting and daub the body. Organic pigments are generally taken from plants and marine animals, such as aziline, gambogia and the ancient Roman purple extracted from shellfish.